Today I have managed to fix 3 units of Starmobile Up+ , one hardware related issue while the other two is a firmware related pr...
Today I have managed to fix 3 units of Starmobile Up+, one hardware related issue while the other two is a firmware related problem due to system modification and malfunction. I always write a guide every time I am dealing with Android smartphone problem that has a software issue such as boot loop and dead boot so in any case my readers encountered the same problem, they can do it by themselves.
This device comes with MediaTek chipset therefor we are going to use SP Flash tool to flash the firmware of Starmobile Up+. If you have SD card plugged in your Starmobile Up+, kindle remove it to avoid any data loss just to be safe.
The firmware included in this guide is for Starmobile Up+ and it is only compatible with Up+ not Up. Check your device model carefully, flashing the wrong firmware might result to corrupted partition.
Are you ready? Please download the required files below. If you have an Adblock extension enabled in your browser, you need to disable it to view the link correctly. Don’t forget to refresh this page.
Things you need:
- Desktop or laptop with Windows operating system (preferably Windows 7)
- Winrar
- USB Cable
- MT65xx Preloader Driver
- SP Flash Tool (Latest version)
If you don’t have an experience in flashing, I highly suggest that you read the detailed instruction.
Flash Starmobile Up+ Firmware
- Create a folder on your desktop and extract all the files using Winrar.
- Install MT65xx Preloader driver.
- Open SP Flash tool folder and run flash_tool.exe.
- Browse the scatter file in the Starmobile Up Plus firmware folder.
- Turn off your device. Wait for at least 5 seconds to make sure your device is completely turn off.
- Now click the Download button from the SP Flash Tool.
- Plug your device into the computer.
- The process should start now, you will see a progress bar from SP Flash tool.
- Wait for the process to finish.
- You’re done.
Need help? Read the detailed instruction for flashing firmware using SP Flash Tool including driver installation.
If your device boot without a signal, that means the IMEI is invalid but do not panic, read my guide how to fix invalid IMEI without rooting your Android phone.
I used this firmware two times without a problem, as long as you follow the procedure you shouldn’t encounter any problem during the process unless there are some other issue in your device that is related to hardware. I hope this blog helps you, please don’t forget to follow us on our Facebook page to get more updates. Thank you for reading
COMMENTS